24,90 €
Incl. VAT, add. delivery costs
Cases & Modding
Whether you're looking for a new PC case for your gaming or office setup, or modding accessories to upgrade your existing build – here you'll find everything from PC cases to modding gear.
Find your perfect case
Use our advisor to discover the best case for you.
1,418 Results
GESV-502
(0)
Stylish Micro-ATX case with good airflow, featuring a breathable mesh front, large tempered glass side panel, pre-installed 120mm fan, graphics cards up to 320mm and CPU coolers up to 160mm, 2x 3.5 and 2x 2.5 inches, front I/O with 1x USB 3.0 and 2x USB 2.0
51,90 €
Incl. VAT, add. delivery costs
ZUST-054
(2)
Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated.
4,90 €
Incl. VAT, add. delivery costs
ZUST-174
(0)
Extremely easy to retrofit and internal DEMCiflex dust filter set for the DAN Cases A4-SFX Mini-ITX case - completely black
Incl. VAT, add. delivery costs
ZUFS-176
(0)
1 Meter sleeve in the colour Diamond-Red (Red), made of PET-X fibers, with a flexible diameter of 5 to 14.5 mm, for modding cables
Incl. VAT, add. delivery costs
7,90 €
Incl. VAT, add. delivery costs
ZUFS-206
(0)
1 Meter sleeve in black, made of PET-X fibers, with flexible diameter up to 5 mm, for modding cables
1,50 €
Incl. VAT, add. delivery costs
ZUMR-029
(0)
Cleansing gel for peripheral devices, made from aloe vera gel, with grape scent, reusable, including storage tin
10,90 €
Incl. VAT, add. delivery costs
4,90 €
Incl. VAT, add. delivery costs
ZUWS-064
(0)
9-piece electronics tool set with screwdrivers, side cutters, and long nose pliers in a practical carrying case
21,30 €
Incl. VAT, add. delivery costs
ZUFS-261
(0)
1 meter sleeve in rich red, made of PET-X fibres, with a flexible diameter of 1.7 to 7.8 mm, for modding cables
Incl. VAT, add. delivery costs
ZUUV-105
(0)
Practical cable management clip from MDPC-X, jumbo version, for holding 12 sleeved cables, mounting with screws in empty M3/UNC slot, 1 clip included
Incl. VAT, add. delivery costs
MOIP-004
(1)
12-volt vandal-resistant switch by Impactics, made of black aluminium with a blue LED ring, 19 mm thread diameter, 35 cm cable length, protected against dust & water according to IP65
19,90 €
Incl. VAT, add. delivery costs
WAEK-1810
(3)
Splitter cable from EK Water Blocks, for up to six 3-pin RGB LED products, high compatibility with motherboards, 30 cm length
10,90 €
Incl. VAT, add. delivery costs
7,90 €
Incl. VAT, add. delivery costs
ZUUV-108
(0)
Fan crimp contacts (female) from MDPC-X, accessory for refining & shortening cables, for cable sizes of 26 AWG (0.22 mm²), 10 pieces included
Incl. VAT, add. delivery costs
ZUWE-472
(0)
Grey mounting bracket, for installing a 2.5-inch drive in a 3.5-inch bay, without height limitation, with mounting materials
3,75 €
Incl. VAT, add. delivery costs
ZUST-181
(0)
Extremely easy to retrofit DEMCiflex dust filter set for the Phanteks Enthoo Luxe - completely black
Incl. VAT, add. delivery costs
ZUFS-146
(0)
1 meter sleeve in intense brown made of PET-X fibers and with a flexible diameter of 1.7 to 7.8 mm for modding cables
Incl. VAT, add. delivery costs
ZUUV-064
(0)
10 pieces of black hook and loop cable ties (20 x 100 mm) from InLine for easy bundling of cables inside and outside the PC
4,90 €
Incl. VAT, add. delivery costs
MOLS-121
(0)
Flexible LED strip from Lamptron, each individual LED is programmable, various effects available, control via infrared remote control, 1 meter long, powered by 4-pin Molex.
Incl. VAT, add. delivery costs
ZUUS-401
(1)
Upgrade kit for the Streacom DA2, with 1x USB 3.1 Gen 2 (USB 3.1), max. 10 Gbit/s, 400 mm cable length
16,90 €
Incl. VAT, add. delivery costs
ZUUV-102
(0)
Practical cable management clip from MDPC-X, small version, for holding a sleeve or pump cable, mounting with screws in empty M3 / UNC slot, 1 clip included
Incl. VAT, add. delivery costs
GESV-280
(0)
Black handles for SilverStone GD07 and GD08 case, for integration into server racks and mobility.
19,90 €
Incl. VAT, add. delivery costs
ZUST-172
(0)
Extremely easy to retrofit and external DEMCiflex dust filter for the left side of the DAN Cases A4-SFX Mini-ITX case - completely black
Incl. VAT, add. delivery costs
ZUWS-192
(0)
Precision tool for electronics, suitable for fine repairs, high-quality workmanship, ergonomic handle
16,90 €
Incl. VAT, add. delivery costs
GEKL-095
(0)
Alternative front panel for the Kolink Unity Nexus Mid-tower, Fully glass with Radial design, Easy installation
Incl. VAT, add. delivery costs
ZUFS-137
(0)
1 meter sleeve in fluorescent lava orange made of PET-X fibres and with a flexible diameter of 1.7 to 7.8 mm for modding cables
Incl. VAT, add. delivery costs
2,90 €
Incl. VAT, add. delivery costs
2,90 €
Incl. VAT, add. delivery costs
LULS-283
(2)
Affordable LED controller from Akasa with 4 control channels and 7 manual lighting modes, synchronization with compatible motherboards possible
15,90 €
Incl. VAT, add. delivery costs
ZUAD-1296
(0)
Splitter cable for up to 3 D-RGB components, three 3-pin plugs to one socket, including adapter for mainboards
7,90 €
Incl. VAT, add. delivery costs
MOLE-050
(2)
Handy splitter cable from Akasa, Splits an RGB-LED connection into four RGB-LED connections, 1x 4-pin RGB LED to 4x 4-pin RGB LED
7,90 €
Incl. VAT, add. delivery costs
ZUWS-195
(0)
Soldering aid made of heat-resistant silicone, for wires from 0 to 4 mm, magnetic attachment
9,90 €
Incl. VAT, add. delivery costs
GEIT-025
(0)
20-inch length, extendable, easy assembly, robust construction, high stability, tool-free installation, compatible with server enclosures
29,90 €
Incl. VAT, add. delivery costs
14,90 €
Incl. VAT, add. delivery costs
GEKL-094
(0)
Alternative front panel for the Kolink Unity Nexus Mid-tower, Fully glass with Landscape design, Easy installation
Incl. VAT, add. delivery costs
Incl. VAT, add. delivery costs
9,90 €
Incl. VAT, add. delivery costs
Expected restock at 13.11.2026
ZUWE-474
(0)
Black mounting frame, for mounting four 2.5-inch drives or, two 2.5-inch and one 3.5-inch drive, in a 3.5-inch bay, height limit 9.5 mm, mounting materials included
4,90 €
Incl. VAT, add. delivery costs
PC Cases & Modding: Cases and Accessories
When building a gaming PC, the case determines what your setup will look like in the end. There are compact mini cases that fit perfectly into a living room setup, as well as eye-catching mid-towers with panoramic glass that let you showcase your hardware and RGB lighting.
If you’re not looking to buy a completely new case but instead want to add extra features or improvements to your current setup, you’ll also find case and modding accessories here.
Cases: Wide Selection of Sizes and Designs
Whether you're building a completely new PC or upgrading with existing hardware, choosing a PC case today is not just about functionality, but also design.
How do I find the right case for me?
The right case depends on your requirements and preferences. There are various colors, sizes, and designs – closed cases, as well as models with tempered glass or wood. To make your choice easier, you’ll find the following categories in our shop:
- PC cases by feature: from sound-dampened cases to showcase builds
- PC cases by material: cases with tempered glass, wood, or mesh for improved airflow
- PC cases by price: price ranges up to €50, €100, €150, €200, and above €200
- PC cases by brand: cases from Lian Li, Phanteks, and more
- PC cases by use case: cases optimized for airflow, living room setups, compact mini cases, and water-cooling builds
Special Cases for Server Systems
In addition to classic cases, you’ll also find rackmount cases designed for servers – from compact 2U server cases to tower server enclosures without a rack.
Case Components and Case Modding
You can also upgrade an existing case with additional components and features.
Case Components
In the case components category, you’ll find fan controllers, panels, mounts for SSDs and graphics cards, dust filters, and other useful accessories.
Case Modding: Customize Your Case
Here you’ll find everything you need to customize your case – tools, RGB controllers, cable sleeves, and cable ties for clean PC cable management.
FAQ – Cases & Modding
Is case accessory compatible with every case?
No, many accessories are designed for specific case models or form factors. Only some components, such as screws, are universally compatible.
Can I modify my PC case afterward?
Yes, many cases can be upgraded with accessories and modding components, as long as suitable mounting points and installation options are available.
How do you get started with case modding?
Beginners usually start with simple upgrades such as cable management, lighting, or minor modifications to the case.